메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
박용우 (서울과학기술대학교) 엄인용 (서울과학기술대학교)
저널정보
한국자동차공학회 한국자동차공학회논문집 한국자동차공학회논문집 제32권 제1호
발행연도
2024.1
수록면
59 - 68 (10page)
DOI
10.7467/KSAE.2024.32.1.59

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In this study, the steady flow characteristics of 27 port opening cases in CI engines were evaluated and compared with existing SI results to determine the macroscopic characteristics and differences between two engines. For this purpose, the swirl ratios were evaluated from 1.75 B to 6.00 B, using an impulse swirl meter and a particle image velocimetry. Then, the average of these values was calculated for each port and evaluation method so that changes in value can be analyzed, depending on the measurement location. Through this approach, the following results were obtained. Overall, the flow characteristics of the CI indicated less changes and remained consistent than SI, regardless of measurement location and method. Opening both ports simultaneously is very similar to the case of opening the tangential port. In the ISM evaluation, swirl decreased toward the downstream for both CI and SI, and the decrease was greatest in the case of the opened helical port. In the PIV evaluation, the swirl of the CI decreased as it went downstream, but SI exhibited different characteristics, depending on the shape of the combustion chamber. Additionally, in the PIV evaluation, if the axial velocity is assumed to be proportional to the planar velocity, swirl was at its highest. In the CI, the value was closest to the ISM evaluation, whereas, in SI, it varied, depending on the shape of the combustion chamber and the port. When the PIV evaluation was at its highest in CI, TVO closely matched ISM, starting at 3.00 B, FVO was always lower than ISM, and BVO matched well with ISM across the entire plane. Lastly, in the case of a pent roof combustion chamber in SI, the relative swirl ratio increased significantly as it went downstream. However, when a semi-wedge combustion chamber was adopted, the change in relative swirl ratio according to the measurement position was like that of CI.

목차

Abstract
1. 서론
2. 실험 장치 및 방법
3. 결과 및 검토
4. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0