메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
문지훈 (서울과학기술대학교) 노민주 (서울과학기술대학교) 박종훈 (서울과학기술대학교) 오승록 (서울과학기술대학교) 박창용 (서울과학기술대학교)
저널정보
대한설비공학회 대한설비공학회 학술발표대회논문집 대한설비공학회 2020년도 하계학술발표대회 논문집
발행연도
2020.6
수록면
959 - 962 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This experimental study was carried out to visualize the flow in the flow path between the chevron corrugated two plates in a heat exchanger. HFE7100 were used as working fluid. A test section was made to visualize the flow characteristics in the flow channels formed by a metal plate with chevron patterns and transparent replica of the counterpart plate. The two phase condition at the test section inlet was controlled by a pre-heater powered by electricity. A test facility was built up to visualize the flow pattern at the condition of upward flow at the test section. The mass flux was controlled at 60 ㎏/㎡·s. The inlet vapor quality was varied from 0.05 to 0.5. The visualization was performed by a high speed camera with 1800fps. The visualized flow patterns showed that the wetted area by liquid phase increased with the increase of vapor quality up to 0.5 at the test section.

목차

Abstract
1. 서론
2. 실험장치 및 방법
3. 실험 결과 및 고찰
4. 결론
References

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0