메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
윤용상 (한국건설기술연구원) 최원기 (자산유리) 심명희 (한국건설기술연구원)
저널정보
대한건축학회 대한건축학회 논문집 - 계획계 大韓建築學會論文集 計劃系 第29卷 第7號
발행연도
2013.7
수록면
255 - 263 (9page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Most of the newly built office buildings contains curtain wall structures with a high window-to-wall ratio, which raise concerns over the excessive energy consumption due to the glass with a relatively high heat transmission coefficient. However, when an office building has high insulation performance as high as the walls of residential buildings due to larger cooling load compared to heating load and the high heating value generated within the building, the reduction of conductive heat loss can cause an increase in energy demand. Therefore, in this study, fundamental research on the characteristics of energy performance based on the conditions of glazing performance, window area ratio and internal heat generation when planning office buildings, was carried out and the results are as follows.
An increase in internal heating value caused slight decrease in heating energy while increasing significantly cooling energy demand. Also, low heat transmission coefficient of glazing reduced conductive heat loss, increasing the energy demand. As window area ratio decreased at SHGC greater than 0.3, the energy demand was also reduced.
In the future, reasonable standards for the glazing performance (U-factor, SHGC, VLT) to reduce the energy consumption in office buildings are to be derived through the analysis of the energy demands based on more diverse building sizes, and also, using the standards, glazing design guidelines to afford appropriate selection of glazing in the planning stages of buildings should be developed.

목차

Abstract
1. 서론
2. 선행 연구 분석
3. 시뮬레이션 개요
4. 시뮬레이션 결과 분석
5. 결론
참고문헌

참고문헌 (1)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2014-500-002970705