평판 위에서 vortex generator(VG)의 후류 유동장 데이터를 Stereoscopic Particle Image Velocimetry (PIV) 로 측정하였다. 실험된 VG의 높이(h)는 설치 지점 경계층 두께(δ)와 같으며, 길이는 높이의 2배와 5배의 두 가지이다. 유동장 데이터는 VG의 뒷전에서 흐름방향으로 300 mm 위치까지(Δz/h=20) 8개 측정 지점에서 얻어졌다. VG에 의해 streamwise vortex가 생성되는 것을 확인하였으며, streamwise vortex에 의한 유동장 변화를 정량적으로 측정하였다. VG의 각도와 길이에 의한 효과는 streamwise vorticity(ω<SUB>z</SUB>)로 확인하였으며, streamwise vorticity는 유동장 데이터로부터 계산되었다. VG의 각도는 10°, 15° 그리고 20°의 세 가지 경우이며, 각도와 길이가 증가할수록 peak streamwise vorticity(ω<SUB>z, max</SUB>)의 강도가 증가하는 것을 확인하였다.
Flow field data downstream of a single conventional vortex generator (VG) were measured using a Stereoscopic Particle Image Velocimetry. The VG height was taken to be the same as is the boundary layer thickness(δ) at the location of VG. Two different, case of height, two and five times of the height were tested. Velocity field were measured at eight downstream stations of the VG. The incidence angles of the VG were set at 10°, 15° and 20°. Variation of streamwise vorticity(ω<SUB>z</SUB>) for various configurations were presented. We confirmed that the peak streamwise vorticity(ω<SUB>z, max</SUB>) increases with incidence angle and the length of the VG.