지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2010.4
- 수록면
- 210 - 224 (15page)
이용수
초록· 키워드
오류제보하기
The aim of the present study is to investigate the buckling strength of plates and stiffened panels with opening under transverse thrust and shear actions. It is observed that the existing design formulation for critical-buckling strength of plates are not valid for perforated plates, because the current design formulation trends can significantly overestimate or underestimate the load-carrying capacity of plates when plates have large opening and/or are thick. A series of eigen value and elastic.plastic large deflection finite element analyses are carried out with varying the aspect ratio of plate, the opening size and location on plate until and after the ultimate strength is reached. Based on the results obtained from the present study, closed-form design formulations for the elastic buckling strength of plates and stiffened panels with opening are derived. The derived design formulations are considered plasticity correction of the material and verified by experimental tests and results of nonlinear finite element computations.
목차
Abstract
1. 서론
2. 설계식의 도출과 적합성 검토
3. 결론 및 향후 연구
참고문헌
참고문헌 (17)
참고문헌 신청
1. [단행본] - DNV / 2008 / Rules for Ships, Pt. 3, Ch. 1, Sec. 13 Buckling Control / Det Norske Veritas
2. [학술지(정기간행물)] - Harada, M / 2001 / Estimation of Buckling and Ultimate Strength of Rectangular Plate with Cutout / Journal of Society of Naval Architects of Japan 190 : 723 ~ 729
3. [학술지(정기간행물)] - Harada, M / 2002 / Estimation of Buckling and Ultimate Strength of Continuous Plate with Cutout under Thrust / Journal of Society of Naval Architects of Japan 192 : 367 ~ 375
4. [단행본] - IACS / 2006 / Common Structural Rules for Double Hull Oil Tankers / International Association of Classification Societies
5. [단행본] - IACS / 2006 / Common Structural Rules for Bulk Carriers / International Association of Classification Societies
2. [학술지(정기간행물)] - Harada, M / 2001 / Estimation of Buckling and Ultimate Strength of Rectangular Plate with Cutout / Journal of Society of Naval Architects of Japan 190 : 723 ~ 729
3. [학술지(정기간행물)] - Harada, M / 2002 / Estimation of Buckling and Ultimate Strength of Continuous Plate with Cutout under Thrust / Journal of Society of Naval Architects of Japan 192 : 367 ~ 375
4. [단행본] - IACS / 2006 / Common Structural Rules for Double Hull Oil Tankers / International Association of Classification Societies
5. [단행본] - IACS / 2006 / Common Structural Rules for Bulk Carriers / International Association of Classification Societies
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Ultimate Strength Formulation for Steel Plated Structure
한국해양환경·에너지학회 학술대회논문집
2012 .05
-
On the post-buckling behaviour of plates under stress gradient
Structural engineering and mechanics : An international journal
1996 .01
-
Elastic buckling of perforated plates subjected to linearly varying in-plane loading
Structural engineering and mechanics : An international journal
2008 .01
-
탄성지지 유공 보강판의 좌굴 해석 ( The Buckling Analysis of Stiffened Opening plates with Elastic Supported )
대한건축학회 논문집
1994 .11
-
The buckling of rectangular plates with opening using a polynomial method
Structural engineering and mechanics : An international journal
2005 .01
-
Buckling and vibration analysis of stiffened plate subjected to in-plane concentrated load
Structural engineering and mechanics : An international journal
2003 .01
-
Use of Buckling Coefficient in Predicting Buckling Load of Plates with and without Holes
복합신소재구조학회논문집
2014 .01
-
용접 H형강주의 판요소국부좌굴을 고려한 내력에 관한 실험적 고찰 ( An Experimental Research on the Strength of the Welded H Steel Column with Local Buckling of Plate Elements )
대한건축학회 학술발표대회 논문집 - 구조계
1986 .04
-
Computational analysis and design formula development for the design of curved plates for ships and offshore structures
Structural engineering and mechanics : An international journal
2014 .01
-
Buckling Analysis of Rectangular Plates using an Enhanced 9-node Element
ARCHITECTURAL RESEARCH
2016 .09
-
원공을 갖는 복합적층판의 좌굴 및 진동해석
대한기계학회 춘추학술대회
2002 .05
-
Using FEM and artificial networks to predict on elastic buckling load of perforated rectangular plates under linearly varying in-plane normal load
Structural engineering and mechanics : An international journal
2010 .01
-
Comprehensive investigation of buckling behavior of plates considering effects of holes
Structural engineering and mechanics : An international journal
2018 .01
-
전단변형을 고려한 평판의 좌굴에 관한 연구 ( A Study on the Buckling Analysis of Rectangular Plate in Consideration of Transverse Shear Effects )
대한건축학회 학술발표대회 논문집 - 구조계
1987 .10
-
Buckling behaviour of plates partially restrained against rotation under stress gradient
Structural engineering and mechanics : An international journal
1996 .01
-
형상비와 스티프너 보강형태에 따른 강판전단패널의 구조적 거동 (I) : 일방향 하중재하 실험
대한건축학회 논문집 - 구조계
2006 .05
-
전달 매트릭스법에 의한 보강평판의 좌굴해석에 관한 연구 ( A Study on the Buckling Analysis of Stiffened Plate by Transfer Matrix Method )
대한건축학회 학술발표대회 논문집 - 구조계
1988 .10
이 논문의 저자 정보
이 논문과 함께 이용한 논문
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2013-559-001665795