메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2008년도 열공학부문/유체공학부문 춘계학술대회 논문집
발행연도
2008.4
수록면
70 - 73 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
For heat pumps used in the cold region, it is very important to obtain appropriate heating capacity. Gas injection technique has been proved as an effective method to enhance heating capacity of a heat pump operated in cold climate. Several control devices should be implemented into the gas injection cycle due to a wide operating range of the system. In this study, a gas/liquid separator was used to inject vapor refrigerant into the twin rotary type compressor. In addition, two EEVs and an injection valve were installed to control the refrigerant flow rates in the main and injection loops. Although the gas injection cycle operates at various operating conditions, refrigerant charge amount should be fixed. Therefore, it is very important to investigate the effects of operating conditions on the optimal refrigerant charge of the gas injection cycle. In the present tests, the heating performance of the gas injection cycle was measured by varying refrigerant charge amount, EEV opening, and compressor frequency at the standard heating condition. The optimal refrigerant charge was very sensitive with openings of the first and second EEVs. On the other hand, the optimal refrigerant charge was not dependent on compressor frequency.

목차

Abstract
1. 서론
2. 실험장치 및 방법
3. 실험결과 및 고찰
4. 결론
후기
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-550-018670573