메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
저널정보
한국유체기계학회 한국유체기계학회 학술대회 논문집 유체기계공업학회 2007 유체기계 연구개발 발표회 논문집
발행연도
2007.11
수록면
503 - 508 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (5)

초록· 키워드

오류제보하기
This paper identifies and describes the sources of uncertainty that are associated with the application of clamp-on ultrasonic flowmeters. Especially where possible are backed up with reference to experimental results. The temperature of the transducer will affect the velocity of sound in the transducer material, ct, and hence the calculated angle of the path in the flow. The magnitude of the resulting error is dependent on the properties of the transducer material. The PZT transducer material will vary from manufacturer to manufacturer with a resulting influence on performance. Tests at CM ENTECH have quantified the temperature effect for 2 particular clamp-on flowmeter. The tests were conducted on a single-path clamp-on meter by testing using water at different temperatures. The test involved a temperature change of 21 to 31 ℃ in the water. Ambient temperature was approximately 24 ℃ and 27 ℃ throughout. The results of this test are presented, which shows a deviation of 3.5 % between with reference and the two sets of data. In practice in the water industry, water temperature and hence transducer temperature is unlikely to vary by more than 10 degrees ℃. The corresponding error would therefore be expected to be less than 3 %.

목차

ABSTRACT
1. 서론
2. 외벽부착식 초음파 유속측정 모델
3. 실험방법
4. 실험결과
5. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-554-014762354